(Calgary, AB) - June 16, 2015 - PERM Inc. President & CEO, Dr. Apostolos Kantzas is featured in a video presentation from 2014 on the Grosmont Carbonates in Alberta and the results (production and SOR) achieved. WATCH PRESENTATION HERE A few quotes from the presentation: The presentation I am going to give you today [...]
(Calgary, AB) - June 1, 2015 - PERM Inc. is excited to announce that it will be presenting on three different topics during the 2015 Global Petroleum Show in the SPE Heavy Oil Technical Conference.If you are in Calgary and plan on attending the SPE Conference, then come on down and check out the talks and [...]
(Calgary, AB) - June 1, 2015 - PERM Inc. will be at the Global Petroleum Show 2015 in Calgary, Alberta, Canada from June 9 to June 11th, 2015! PERM is located in Hall F, Booth #8128. If you don't have a pass to the GPS2015 yet, register here and use the code GP480 to get in [...]
David from Calgary Asks PERM: What methodology would you propose for measuring drainage capillary pressure vs. wetting phase saturation? Typical plug perm is Regards, Dave Dr. Jonathan Bryan from PERM Answers: For tight core plugs our best bet for measuring drainage capillary pressure is through centrifugation. In this approach, we would saturate the core wetting phase [...]
(Calgary, AB) - May 5, 2015 - PERM Inc. has been very busy conducting all sorts of R&D from corefloods, enhanced oil recovery, special core analysis, along with modeling & simulation.This week PERM's principals are particularly busy with a lot of presentations (5 presentations!!) at the GeoConvention!If you happen to be in Calgary at the GeoConvention this week, then we would [...]
Imam from Indonesia Asks PERM: Is it necessary to determine T2 cut off to obtain permeability with NMR logging? If we don't have any NMR lab measurement data, how to adjust T2 cut off and justification for that? I am worried when I used default T2 cut off (let's say 33 ms for clastic). I got low correlation [...]
Mudar Asks PERM: Dear Sir/Madam, I am thinking that to simulate saturation properly in the reservoir by SHF via Pc, it is more relevant to use vertical plugs rather than horizontal as common, because water is sucked up by capillarity force mainly vertically. Please provide your view with explanation. Thanks Mudar Senior Petrophysicist Dr. Jonathan [...]
Castor from UAE Asks PERM: Hello, We will be drilling & coring with a “KPG (KCL-PHPA-Glycol) Low salinity” fluid, with a pH of 9.5-10. We will use D20 tracers to assess the core invasion of the fluid. However, from the literature I have read the following: “PHPA mud contamination strengthens the wettability of water-wet reservoir [...]
(Calgary, AB) - April 10, 2015 PERM Inc.'s CEO, Dr. Apostolos Kantzas, was interviewed by Business World Magazine in March 2015! Check out the article by clicking the link below! PERM Inc. Always Innovating PS> If you would like to interview Dr. Kantzas, please feel free to get in touch on the contact us [...]
(Calgary, AB) - March 24, 2015 PERM Inc.'s VP of Technology, Dr. Sergey Kryuchkov, will be presenting at the World Heavy Oil Congress 2015 in Edmonton, Alberta! On the Modeling of Viscous Oil-Water Immiscible Displacements Date: March 25, 2015 Time: 3:00PM - 3:30PM Program: Technical Details It is well known that microscopic phenomena occurring [...]
