Monthly Archives: January 2016

Home/2016/January

Ensuring Capillary Contact in Porous Plate Drainage Measurements using Impedance | Ask PERM

Joseph Asks PERM: Dear Sir/Madam, In Drainage Capillary pressure measurements using porous plate, how will you ensure that there is enough/good capillary contact between the core plug sample and porous plate? In most cases labs uses the 2 electrode core holder. And i have heard that if the phase angle of impedance measured across the electrode [...]

2016-01-25T11:35:48-07:00January 25th, 2016|Ask PERM (Q&A)|Comments Off on Ensuring Capillary Contact in Porous Plate Drainage Measurements using Impedance | Ask PERM

Should Slim Tube Tests Use Reservoir Rock? | Ask PERM

Ehab Asks PERM: My question is related to the Slim Tube Test procedure and here it is; The porous media which fills the coiled tube through it the oil and solvent passes. Should this porous media of the same reservoir rock or not? My thought it is of glass beads or Otawa Sand, is not it? [...]

2016-01-18T12:09:05-07:00January 18th, 2016|Ask PERM (Q&A)|Comments Off on Should Slim Tube Tests Use Reservoir Rock? | Ask PERM

What is the Effect on Trapping of Oil Drop in a Pore Doublet Throat When Oil Viscosity is High? | Ask PERM

Aya asks PERM:  What will happen if viscosity of oil was not equal to viscosity  of water , what is the general effect on trapping of oil drop in a pore doublet throat if the viscosity of oil was large ? -Aya   Dr. Jonathan Bryan from PERM Answers: This is a great question! The [...]

2016-10-25T11:54:48-06:00January 14th, 2016|Ask PERM (Q&A)|Comments Off on What is the Effect on Trapping of Oil Drop in a Pore Doublet Throat When Oil Viscosity is High? | Ask PERM

2016 Training Course Schedule for Engineers, Geologist and Petrophysicists, etc

(Calgary, AB) - January 13, 2016 - PERM Inc.'s 2016 schedule for training classes is listed below.  These are 2-day courses hosted in Calgary, Alberta, Canada that are well suited for Geologists, Engineers and Petrophysicists - or anyone wanting to learn more about reservoirs and Enhanced Oil Recovery (EOR). ENHANCED OIL RECOVERY: Process and Mechanisms [...]

2016-07-19T10:33:36-06:00January 13th, 2016|Courses|Comments Off on 2016 Training Course Schedule for Engineers, Geologist and Petrophysicists, etc

Alberta Grant Subsidizes 66% of Training Program

(Calgary, AB) - January 12, 2016 - PERM Inc. has discovered a grant available from the Alberta government, called the Canada-Alberta Job Grant, that can help subsidize up to 66% of a training program cost (up to $10,000 per year) for Alberta based employees that wish to take additional training.  There is a maximum of $300,000 [...]

2016-01-12T10:24:13-07:00January 12th, 2016|Courses|Comments Off on Alberta Grant Subsidizes 66% of Training Program

General Rules of Thumb for Picking Injection Rates in a Core Flood? | Ask PERM

Binu Asks PERM: Dear sir, I am planning to conduct a core flood experiment using a restored core of 7 cm length, 3 cm diameter, 14% porosity and liquid permeability of 50 mD. The PV of the core is 15 ml. Kindly tell me how to set the injection rate in ml/hr. Is there any rule [...]

2016-01-13T17:34:16-07:00January 4th, 2016|Ask PERM (Q&A)|Comments Off on General Rules of Thumb for Picking Injection Rates in a Core Flood? | Ask PERM

Title

E-MAIL NEWSLETTER

Sign up and NOW to receive the latest news, updates and technological advancements made for the Special Core Analysis & Enhanced Oil Recovery Industry

If you don't sign up, you won't know when the next breakthrough occurs!
Go to Top