Sign up and NOW to receive the latest news, updates and technological advancements made for the Special Core Analysis & Enhanced Oil Recovery Industry

If you don't sign up, you won't know when the next breakthrough occurs!


/Bob bob

About Bob bob

This author has not yet filled in any details.
So far Bob bob has created 39 blog entries.

PERM is Presenting at AAPG!

(Calgary, AB) - Friday June 17, 2016 - PERM Inc.  has a booth (Booth #1137) and will be presenting at the 2016 AAPG in Calgary, AB.   If you plan on attending the AAPG 2016 this week, then come on down and check out the talks and stop by and say hello! Monday June 20, 2016 Title:           [...]

2016-10-25T11:54:48+00:00 June 17th, 2016|News|0 Comments

What is the residual oil saturation for water flooding vs immiscible gas flooding? | Ask PERM

Amir Asks PERM: Hi there, If you flood two identical cores (let's say with poro=25%, perm=200 md) one with water and another one with immiscible gas (like associated gas), for which case do you expect a higher residual oil saturation? Thanks, Amir   Dr. Jonathan Bryan from PERM Answers: Hello, Let’s start by assuming that [...]

2016-10-25T11:54:48+00:00 May 26th, 2016|Ask PERM (Q&A)|0 Comments

PERM is Presenting at GeoConvention 2016

(Calgary, AB) - Monday March 7, 2016 - PERM Inc.  has a booth (Booth #514) and will be presenting at the 2016 GeoConvention in Calgary, AB.   If you plan on attending the GeoConvention 2016, then come on down and check out the talks and stop by and say hello! PERM Inc. will have a total of 3 presentations at [...]

2016-10-25T11:54:48+00:00 March 7th, 2016|News|0 Comments

Clarifications on the Jamin Effect and Why High Capillary Pressure is Bad for Flow? | Ask PERM

David Asks PERM: Dear Perm, My name is David. I am studying petroleum engineering, and I read the article from your web page about the Jamin effect. At the bottom of the page, it said that we can ask question to you about the subject. I therefore have a question about the article on you web [...]

2016-10-25T11:54:48+00:00 February 17th, 2016|Ask PERM (Q&A)|0 Comments

Oil Viscosity Selection for Unsteady State Relative Permeability Tests? | Ask PERM

Marko Asks PERM: Hi, I like your site very much and especially the Fundamentals of fluid flow paper. I hope that you can answer me one question regarding the oil viscosity selection for the unsteady state relative permeability measurements at room conditions for the oil/water system. I heard that the general practice for the paraffinic oil [...]

2016-10-25T11:54:48+00:00 February 4th, 2016|Ask PERM (Q&A)|0 Comments

Ensuring Capillary Contact in Porous Plate Drainage Measurements using Impedance | Ask PERM

Joseph Asks PERM: Dear Sir/Madam, In Drainage Capillary pressure measurements using porous plate, how will you ensure that there is enough/good capillary contact between the core plug sample and porous plate? In most cases labs uses the 2 electrode core holder. And i have heard that if the phase angle of impedance measured across the electrode [...]

2016-01-25T11:35:48+00:00 January 25th, 2016|Ask PERM (Q&A)|0 Comments

Should Slim Tube Tests Use Reservoir Rock? | Ask PERM

Ehab Asks PERM: My question is related to the Slim Tube Test procedure and here it is; The porous media which fills the coiled tube through it the oil and solvent passes. Should this porous media of the same reservoir rock or not? My thought it is of glass beads or Otawa Sand, is not it? [...]

2016-01-18T12:09:05+00:00 January 18th, 2016|Ask PERM (Q&A)|0 Comments

What is the Effect on Trapping of Oil Drop in a Pore Doublet Throat When Oil Viscosity is High? | Ask PERM

Aya asks PERM:  What will happen if viscosity of oil was not equal to viscosity  of water , what is the general effect on trapping of oil drop in a pore doublet throat if the viscosity of oil was large ? -Aya   Dr. Jonathan Bryan from PERM Answers: This is a great question! The [...]

2016-10-25T11:54:48+00:00 January 14th, 2016|Ask PERM (Q&A)|0 Comments

2016 Training Course Schedule for Engineers, Geologist and Petrophysicists, etc

(Calgary, AB) - January 13, 2016 - PERM Inc.'s 2016 schedule for training classes is listed below.  These are 2-day courses hosted in Calgary, Alberta, Canada that are well suited for Geologists, Engineers and Petrophysicists - or anyone wanting to learn more about reservoirs and Enhanced Oil Recovery (EOR). ENHANCED OIL RECOVERY: Process and Mechanisms [...]

2016-07-19T10:33:36+00:00 January 13th, 2016|Courses|0 Comments

Alberta Grant Subsidizes 66% of Training Program

(Calgary, AB) - January 12, 2016 - PERM Inc. has discovered a grant available from the Alberta government, called the Canada-Alberta Job Grant, that can help subsidize up to 66% of a training program cost (up to $10,000 per year) for Alberta based employees that wish to take additional training.  There is a maximum of $300,000 [...]

2016-01-12T10:24:13+00:00 January 12th, 2016|Courses|0 Comments